Aplikasi:
Untuk menguji ketahana isolasi pin terhadap panas yang tidak normal.
Order
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.
Standard Outfit:
Untuk menguji ketahana isolasi pin terhadap panas yang tidak normal.
| Model | : PS-003 |
| Suplai daya | : AC 220V, 50Hz |
| Kategori | : Alat uji tusuk kontak |
| Dimensi(mm) | : 400 x 400 x 400 |
| Berat (Kg) | : 20 ~ 25 Kg |
| Produk/sample uji | : Pin isolasi, steker, plug, dll |
| Sesuai standar | : SNI IEC 60884-1 gambar 40 |
Order
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.
Standard Outfit:
- 1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet,
- 5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet,
- 1 thermocouple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position
- Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product.
- Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced.
- Gap between the boards of insulation and metal B : 3 mm,
- The distance between the metal thermocouples & B: 7 mm
- Metal bolt hole B : more than 0.1 mm
0 komentar: